Breaker Box Map
This page documents which circuit breaker controls which area of the house. Use this if a power outlet or light stops working — check if the corresponding breaker has tripped.
Last updated: [DATE]
Main Distribution Board Location
[DESCRIBE LOCATION — e.g. "Ground floor, near the main entrance, inside the utility room on the left wall"]
How to Reset a Tripped Breaker
A tripped breaker will be in the middle position (neither fully ON nor fully OFF). To reset:
- First switch OFF the breaker completely
- Then switch it back ON firmly
- If it trips again immediately, do not force it — call the electrician. There may be a fault in that circuit.
Circuit Breaker Map
Note: Fill in this table after the electrical work is complete and you have identified each breaker.
| Breaker No. | Label | Controls | Floor |
|---|---|---|---|
| 1 | [LABEL] | [AREA/ROOM] | [FLOOR] |
| 2 | [LABEL] | [AREA/ROOM] | [FLOOR] |
| 3 | [LABEL] | [AREA/ROOM] | [FLOOR] |
| 4 | [LABEL] | [AREA/ROOM] | [FLOOR] |
| 5 | [LABEL] | [AREA/ROOM] | [FLOOR] |
| 6 | [LABEL] | [AREA/ROOM] | [FLOOR] |
| 7 | [LABEL] | [AREA/ROOM] | [FLOOR] |
| 8 | [LABEL] | [AREA/ROOM] | [FLOOR] |
| Main | Main switch | Entire house | — |
Inverter / Generator Changeover
If there is a power outage and the inverter or generator needs to be switched on manually:
Inverter location: [LOCATION]
To switch to inverter: 1. [STEP 1] 2. [STEP 2] 3. [STEP 3]
To switch back to mains when power returns: 1. [STEP 1] 2. [STEP 2]
If the inverter does not come on automatically during a power cut, check if the inverter is powered on and the battery indicator shows sufficient charge.
Electrician Contact
If a breaker keeps tripping or you smell burning near any electrical fitting, switch off the main breaker immediately and call the electrician.
| Contact | Details |
|---|---|
| Electrician Name | [NAME] |
| Phone | [PHONE NUMBER] |
| Available | [HOURS / DAYS] |
This page should be updated whenever new circuits are added or the electrical layout changes. Ask Bipin to update it.